HydraMaxx: A high performance hydraulic oil additive package designed for blending with synthetic or conventional hydraulic oils. Provides extra protection for hydraulic systems, also to be used in automatic transmissions.
{gallery}PowerUp HydraMaxx Product Images:100:142:0:0{/gallery}
Viscosity Index Improvers: Enhanced VII maintain lubricant flow and improve shear stability of the oil, especially at extreme temperatures.
Water Demulsifiers: Improves fluid ability to separate from water, virtually eliminating hydraulic issues related to water.
Pour Point Depressants: Reduce the pour point and improve flow at low temperatures.
Detergents and Dispersants: Enhances the fluid's ability to clean and disperse contaminants.
Extreme Pressure/Anti-Wear additives: Polarized AW, Friction Modifier and EP components provide unequaled protection for pumps, pistons, and sleeves. Fluid strength in increased allowing for significant friction reduction and protection of vital hydraulic components. Polarized film protects pumps during start up conditions.
Seal Conditioning Agents: reduces the long term effects of heat exposure to elastomer seals, keeping seals pliable.
Oxidation Inhibitors and Acid Neutralizers: Enhanced alkaline reserve prevent oil breakdown during service life. Increased stability and performance of the basic lubricating components of the oil.
Rust and Corrosion Inhibitors: protect against adverse effects of moisture and oil oxidation caused by free wear metals present in oil.
Carefully balanced formula is designed to complement and enhance the existing hydraulic oil formulations. Hydramaxx is not recommended for use with water based fluids, phosphate esters or polyglycol fluids.
Mix appropriate amount of HydraMaxx based on oil volume with synthetic or conventional hydraulic oil prior to putting in reservoir. HydraMaxx may be added directly to the existing fluid in reservoirs when needed, allow equipment to run to ensure oil circulation before applying heavy loads. HydraMaxx must be mixed with oil on each oil change/fill to obtain maximum benefits.
TREAT RATIO at temperatures above 0C: 3% of oil volume (150 mL treats 5L, 1L treats 33L)
TREAT RATIO at temperatures below 0C: 5% of oil volume (150mL treats 3L, 1L treats 20L)
Recommended Usage
HydraMaxx is recommended for all hydraulic circulating systems and is compatible with Nitrile, Neoprene and Florocarbon elastomer seals. HydraMaxx may also be used in automatic transmissions at 1% TREAT RATIO. Oil sampling is recommended when extending fluid service life. HydraMaxx can be used to enhance existing additive packages or for creating custom oil blends in situ. Always ensure oil blends meet the minimum requirements as outlined by OEM.
See the Material Safety Data Sheet.